6311ZNR
| PRODUCT DEFINITION | |
|---|---|
| Brand | NTN |
| d - Internal diameter | 55 mm |
| D - External diameter | 120 mm |
| B - Bearing/Inner ring width | 29 mm |
| a min - Min position Groove | 3,86 mm |
| a max - Max position groove | 4,06 mm |
| rs - Min fillet radius | 2 mm |
| rNs - Min fillet radius | 0,5 mm |
| D3 - Max bottom groove diameter | 115,21 mm |
| b min - Min groove width | 3,1 mm |
| b max - Max groove width | 3,4 mm |
| r0 max - Max bottom groove radius | 0,6 mm |
| D4 max - Max outer diameter of assembled stop ring | 129,7 mm |
| f - Stop ring thickness | 2,82 mm |
| Snap ring reference | R120 |
| Radial clearance class | CN |
| Mass | 1,37 kg |
| PRODUCT PERFORMANCE | |
|---|---|
| C - Dynamic load | 79,5 kN |
| C0 - Static load | 45 kN |
| Cu - Fatigue limit load | 3,5 kN |
| f0 - Coefficient | 13.2 |
| Nlim - Oil lubrication limit speed | 6800 tr/min |
| Nlim - Grease lubrication limit speed | 5800 tr/min |
| Tmin - Min operating temperature | -40 °C |
| Tmax - Max operating temperature | 120 °C |
|
ABUTMENT |
|
|---|---|
| da min - Min shoulder diameter IR | 64 mm |
| Da max - Max shoulder diameter OR | 111 mm |
| ra max - Max shaft & housing fillet radius | 2 mm |
| rNa max - Max fillet radius on segment side | 0,5 mm |
| Ca min - Mini segment position | 6,58 mm |
| Ca max - Max segment position | 6,88 mm |
| Db min - Min stop ring position diameter | 131,5 mm |
| Brand | NTN |
| Inner (MM) | 55 |
| Inner (Inch) | 2.1654 |
| Outer (MM) | 120 |
| Outer (Inch) | 4.7244 |
| Width (MM) | 29 |
| Width (Inch) | 1.1417 |
| Shipping Cost |
|
| Product Location | LEBANON SAIDA GHAZIEH 16000, Lebanon |
No reviews found!
No comments found for this product. Be the first to comment!